2024年3月22日发(作者：森采萱)
SURFACE ROUGHNESS/CONTOUR MEASURING SYSTEM
Dual-purpose measurement and powerful analysis of surface roughness and
contour combined with high accuracy, high drive speed and simplified
CNC measurement
F
O
R
M
M
E
A
S
U
R
E
M
E
N
T
FORMTRACER SV-C3200/4500 SERIES
Bulletin No. 2195(2)
Hybrid measuring instrument for
surface roughness and contour measurement
Contour Measuring Functions
Detector with new arm design
Mitutoyo’s newly designed detector arm lowers workpiece interference
while expanding the measurement range in the Z1 axis (detector).
• When using the SPH-71 one-sided cut stylus
• SV-C4100
(Conventional product)
• SV-C4500
New function specified for 4500 Series
Continuous top-bottom measurement function
Upper and lower surfaces can be measured continuously by using
Mitutoyo’s double-sided conical stylus.
This continuous measurement data can be used to facilitate
analysis of features that were difficult to measure before, such as
the effective diameter of an internal screw-thread.
Lower direction measurement
(Bottom surface)
Upper direction measurement
(Top surface)
50
mm
10
mm
60
mm
19
mm
Detector measurement range expanded by 10 mm
Top and bottom
measurement
switched by software
Effective
diameter
Plain-section
diameter
One-touch arm attachment
(Patent pending in Japan)
The arm mount uses a magnetic joint for quick and easy arm
replacement. The mount also includes a safety mechanism.
• SV-C4100 (
Conventional product)• SV-C4500
Continuous top-bottom measurement
allows hassle-free one-step calibration
(Patent pending in Japan)
Screw fixing
Removable arm
• Magnetic joint
The one-step calibration kit supplied with the SV-C4500 Series has
been upgraded to enable easy calibration of the double-ended
conical stylus featuring a contact on both the top and the bottom.
Precise work such as calibrating the Z1-axis gain, symmetry, and
stylus radius can now be carried out in a single operation.
• Calibration kit for SV-C4500 Series
Pin gauge
Ball
Arm mount
Gauge blocks
Variable measuring force function
The measuring force can be varied in 5 steps by using the software
provided (FORMTRACEPAK), eliminating the need to adjust
the measuring force by switching
weights or through positional
Measuring
adjustment.
The SV-C4500 Series can also
force
maintain the specified measuring
force even when tilted.
2
2024年3月22日发(作者：森采萱)
SURFACE ROUGHNESS/CONTOUR MEASURING SYSTEM
Dual-purpose measurement and powerful analysis of surface roughness and
contour combined with high accuracy, high drive speed and simplified
CNC measurement
F
O
R
M
M
E
A
S
U
R
E
M
E
N
T
FORMTRACER SV-C3200/4500 SERIES
Bulletin No. 2195(2)
Hybrid measuring instrument for
surface roughness and contour measurement
Contour Measuring Functions
Detector with new arm design
Mitutoyo’s newly designed detector arm lowers workpiece interference
while expanding the measurement range in the Z1 axis (detector).
• When using the SPH-71 one-sided cut stylus
• SV-C4100
(Conventional product)
• SV-C4500
New function specified for 4500 Series
Continuous top-bottom measurement function
Upper and lower surfaces can be measured continuously by using
Mitutoyo’s double-sided conical stylus.
This continuous measurement data can be used to facilitate
analysis of features that were difficult to measure before, such as
the effective diameter of an internal screw-thread.
Lower direction measurement
(Bottom surface)
Upper direction measurement
(Top surface)
50
mm
10
mm
60
mm
19
mm
Detector measurement range expanded by 10 mm
Top and bottom
measurement
switched by software
Effective
diameter
Plain-section
diameter
One-touch arm attachment
(Patent pending in Japan)
The arm mount uses a magnetic joint for quick and easy arm
replacement. The mount also includes a safety mechanism.
• SV-C4100 (
Conventional product)• SV-C4500
Continuous top-bottom measurement
allows hassle-free one-step calibration
(Patent pending in Japan)
Screw fixing
Removable arm
• Magnetic joint
The one-step calibration kit supplied with the SV-C4500 Series has
been upgraded to enable easy calibration of the double-ended
conical stylus featuring a contact on both the top and the bottom.
Precise work such as calibrating the Z1-axis gain, symmetry, and
stylus radius can now be carried out in a single operation.
• Calibration kit for SV-C4500 Series
Pin gauge
Ball
Arm mount
Gauge blocks
Variable measuring force function
The measuring force can be varied in 5 steps by using the software
provided (FORMTRACEPAK), eliminating the need to adjust
the measuring force by switching
weights or through positional
Measuring
adjustment.
The SV-C4500 Series can also
force
maintain the specified measuring
force even when tilted.
2