2024年5月28日发(作者：西门高芬)
Technical Specification Sheet
Document No. 149-476T
April 1, 2023
TX-I/O Product Range
There are eight types of TX-I/O modules:
•
•
•
•
•
•
8 point DI module (TXM1.8D)
16 point DI module (TXM1.16D)
6 point DO with Relay module (TXM1.6R)
6 point DO with Relay and Manual Override
module (TXM1.6R-M)
8 point Universal module (TXM1.8U)
8 point Universal with local override/identification
device (LOID) module
(TXM1.8U-ML)
8 point Super Universal module (TXM1.8X)
8 point Super Universal with LOID module
(TXM1.8X-ML)
Description
TX-I/O™ is a range of I/O modules, with associated
power and communication modules, for use within the
TALON system. The TX-I/O product range includes the
following:
• Eight types of I/O modules, which act as signal
converters. The I/O modules communicate
between the TC Modular or the TC-36 and the
related devices in the building services plant.
TX-I/O Power Supply for the TX-I/O modules.
TX-I/O Bus Connection Module, which bridges
communication and power from one DIN rail to
another.
•
•
•
•
Features
• The self-forming TX-I/O bus transmits power as
well as communication signals. The TX-I/O bus
can be extended a maximum of 160 feet (50
meters).
Hot-swappable electronic components allow
powered electronics to be disconnected and
replaced without removing terminal wiring or
disturbing the self-forming bus.
Page 1 of 8
TX-I/O Modules provide I/O points for TALON based
upon TX-I/O Technology. TX-I/O Technology provides
flexibility of point types, tremendous flexibility of signal
types and support for manual operation.
•
Siemens Industry, Inc.
All TX-I/O modules include the following features:
• DIN rail mounting.
• High density (point count to physical dimensions).
• Hardware addressed with address keys.
• Removable label holder that allows for customized
point labels.
• LEDs that provide status indication and diagnostic
information for the I/O module, as well as for each
point on the module.
• Separable into terminal base and plug-in I/O
module electronics for:
− Improved installation workflow, allowing field
wiring to be terminated prior to installation of
electronics.
− Optimum diagnostics - connected peripheral
devices can be measured without affecting or
being affected by the I/O module.
− Quick replacement of electronics for service.
Module Introduction
Digital Input Modules (TXM1.8D and
TXM1.16D)
The TXM1.8D and TXM1.16D are dedicated to
monitoring, respectively, 8 and 16 digital input points.
• They monitor status signals from normally open
(NO) or normally closed (NC), latched voltage
free/dry contacts.
• All 8 points on the TXM1.8D module as well as 8
of the 16 points on the TXM1.16D module may be
used as pulse counters up to 10 Hz.
• Each input point has a green LED for status
indication.
NOTE:
No potential (dry contact) for all points.
Page 2 of 8
Digital Output Modules (TXM1.6R and
TXM1.6R-M)
The TXM1.6R and TXM1.6R-M Digital Output Modules
provide six NO or NC (form C), maintained or pulsed,
voltage free/dry contacts.
• The contacts are rated for a maximum of 250 Vac
at 4A.
• Each I/O point has a green LED for status
indication.
• The TXM1.6R-M module is also equipped with
manual override switches. An orange LED per
override switch indicates override status
individually per point.
Universal Modules (TXM1.8U and
TXM1.8U-ML)
The TXM1.8U and TXM1.8U-ML Universal I/O
modules provide 8 points, which can be individually
software configured as digital input, analog input, or
analog output to best meet the specific application
needs.
All Universal I/O modules provide:
• AC supply voltage for peripheral devices, such as
valves and actuators.
• Green LED status per I/O point that varies in
intensity according to the voltage and current
(directly proportional).
Siemens Industry, Inc.
2024年5月28日发(作者：西门高芬)
Technical Specification Sheet
Document No. 149-476T
April 1, 2023
TX-I/O Product Range
There are eight types of TX-I/O modules:
•
•
•
•
•
•
8 point DI module (TXM1.8D)
16 point DI module (TXM1.16D)
6 point DO with Relay module (TXM1.6R)
6 point DO with Relay and Manual Override
module (TXM1.6R-M)
8 point Universal module (TXM1.8U)
8 point Universal with local override/identification
device (LOID) module
(TXM1.8U-ML)
8 point Super Universal module (TXM1.8X)
8 point Super Universal with LOID module
(TXM1.8X-ML)
Description
TX-I/O™ is a range of I/O modules, with associated
power and communication modules, for use within the
TALON system. The TX-I/O product range includes the
following:
• Eight types of I/O modules, which act as signal
converters. The I/O modules communicate
between the TC Modular or the TC-36 and the
related devices in the building services plant.
TX-I/O Power Supply for the TX-I/O modules.
TX-I/O Bus Connection Module, which bridges
communication and power from one DIN rail to
another.
•
•
•
•
Features
• The self-forming TX-I/O bus transmits power as
well as communication signals. The TX-I/O bus
can be extended a maximum of 160 feet (50
meters).
Hot-swappable electronic components allow
powered electronics to be disconnected and
replaced without removing terminal wiring or
disturbing the self-forming bus.
Page 1 of 8
TX-I/O Modules provide I/O points for TALON based
upon TX-I/O Technology. TX-I/O Technology provides
flexibility of point types, tremendous flexibility of signal
types and support for manual operation.
•
Siemens Industry, Inc.
All TX-I/O modules include the following features:
• DIN rail mounting.
• High density (point count to physical dimensions).
• Hardware addressed with address keys.
• Removable label holder that allows for customized
point labels.
• LEDs that provide status indication and diagnostic
information for the I/O module, as well as for each
point on the module.
• Separable into terminal base and plug-in I/O
module electronics for:
− Improved installation workflow, allowing field
wiring to be terminated prior to installation of
electronics.
− Optimum diagnostics - connected peripheral
devices can be measured without affecting or
being affected by the I/O module.
− Quick replacement of electronics for service.
Module Introduction
Digital Input Modules (TXM1.8D and
TXM1.16D)
The TXM1.8D and TXM1.16D are dedicated to
monitoring, respectively, 8 and 16 digital input points.
• They monitor status signals from normally open
(NO) or normally closed (NC), latched voltage
free/dry contacts.
• All 8 points on the TXM1.8D module as well as 8
of the 16 points on the TXM1.16D module may be
used as pulse counters up to 10 Hz.
• Each input point has a green LED for status
indication.
NOTE:
No potential (dry contact) for all points.
Page 2 of 8
Digital Output Modules (TXM1.6R and
TXM1.6R-M)
The TXM1.6R and TXM1.6R-M Digital Output Modules
provide six NO or NC (form C), maintained or pulsed,
voltage free/dry contacts.
• The contacts are rated for a maximum of 250 Vac
at 4A.
• Each I/O point has a green LED for status
indication.
• The TXM1.6R-M module is also equipped with
manual override switches. An orange LED per
override switch indicates override status
individually per point.
Universal Modules (TXM1.8U and
TXM1.8U-ML)
The TXM1.8U and TXM1.8U-ML Universal I/O
modules provide 8 points, which can be individually
software configured as digital input, analog input, or
analog output to best meet the specific application
needs.
All Universal I/O modules provide:
• AC supply voltage for peripheral devices, such as
valves and actuators.
• Green LED status per I/O point that varies in
intensity according to the voltage and current
(directly proportional).
Siemens Industry, Inc.