2024年6月2日发(作者：府书)

Edge Go User Manual

1. Safety Notes

To reduce the risk of electrical shocks, fire, and related hazards:

Do not remove the screws, cover, or cabinet. There are no user-serviceable parts inside.

Refer servicing to qualified service personnel.

Do not expose this device to rain, moisture or spillover of liquid of any kind.

Should any form of liquid or a foreign object enter the device, do not use it. Do not operate the

device again until the foreign object is removed or the liquid has completely dried and its residues

fully cleaned up. If in doubt, please consult the manufacturer.

Do not handle cables with wet hands!

Avoid using the device in a narrow and poorly ventilated place, which could affect its operation or

the operation of other closely located components.

If anything goes wrong, unplug the device first. Do not attempt to repair the device yourself.

Consult authorized service personnel or your dealer.

Do not install near any heat sources such as radiators, stoves, or other devices

(including amplifiers) that produce heat.

Do not use harsh chemicals to clean your unit. Clean only with specialized cleaners for

electronics equipment.

To completely turn off the device, unplug the cable.

Both occasional and continued exposure to high sound pressure levels from headphones and

speakers can cause permanent ear damage.

The device is designed to operate in a temperate environment, with a correct operating

temperature of 0-50 °C, 32-122 °F

2. Quick Start

Congratulations on purchasing your Antelope Audio Edge Go bus-powered modeling microphone!

There are just a couple of steps to go through before you are ready to begin recording.

1. Download and install the Edge Go USB Driver and Antelope Audio Launcher for your operating

system.

2. Place the Edge Go into the shockmount or desktop stand and connect the microphone to your

computer using a standard USB C cable (one is provided in the box), or USB C to USB Type-A

(male) cable.

3. Start the Antelope Audio Launcher. Once it's running, update the device firmware and install the

PC/Mac Control Panel for Edge Go. It all happens inside the Launcher.

4. Head to the Software tab and install the EdgeDuo package to get the mic emulations and effects

(FPGA) for Edge Go. Yes, they are the same as in our coveted Edge Duo large-diaphragm

condenser modeling mic.

5. Should you wish to use the mic emulations and effects as native plug-ins in your DAW, download

and install the PACE iLok License Manager software. Plug in an iLok v2/v3 USB dongle (sold

separately) and use the activation codes from the leaflet to download and authorize the plug-ins.

Congratulations! You are now ready to turn Edge Go into the heart of your recording setup.

Thank you for choosing Antelope Audio.

Tip: Use Antelope Launcher for download and installation, iLok License Manager for

authorization.

Tip: Never used audio software (DAW) before? Plug in a pair of headphones into the 3.5mm jack

and explore the presets inside the Control Panel as you talk or play into the microphone. Hear the

difference made by the real-time mic emulations and effects. Experiment with stacking effects and

adjusting parameters to taste. As long as it sounds good, you are doing it right!

Experiencing any difficulties with the initial setup? Head to for a Live

Chat session with a Customer Support specialist, or reach out over phone and e-mail. Availability

times are as follows:

•Support By Phone

US time: 00: – 08: (CST), Monday – Friday

European time: 06: – 02: (GMT), Monday – Friday.

US Phone Number (916) 238-1643 / UK Phone Number +44 1925933423

•Live Chat

US time: 00: – 02: (CST), Monday – Friday

European time: 06: – 08: (GMT), Monday – Friday.

If you’re trying to reach us outside working hours, we advise you to file a ticket in our customer

support system or leave a voice message.

3. The Control Panel and You

2024年6月2日发(作者：府书)

Edge Go User Manual

1. Safety Notes

To reduce the risk of electrical shocks, fire, and related hazards:

Do not remove the screws, cover, or cabinet. There are no user-serviceable parts inside.

Refer servicing to qualified service personnel.

Do not expose this device to rain, moisture or spillover of liquid of any kind.

Should any form of liquid or a foreign object enter the device, do not use it. Do not operate the

device again until the foreign object is removed or the liquid has completely dried and its residues

fully cleaned up. If in doubt, please consult the manufacturer.

Do not handle cables with wet hands!

Avoid using the device in a narrow and poorly ventilated place, which could affect its operation or

the operation of other closely located components.

If anything goes wrong, unplug the device first. Do not attempt to repair the device yourself.

Consult authorized service personnel or your dealer.

Do not install near any heat sources such as radiators, stoves, or other devices

(including amplifiers) that produce heat.

Do not use harsh chemicals to clean your unit. Clean only with specialized cleaners for

electronics equipment.

To completely turn off the device, unplug the cable.

Both occasional and continued exposure to high sound pressure levels from headphones and

speakers can cause permanent ear damage.

The device is designed to operate in a temperate environment, with a correct operating

temperature of 0-50 °C, 32-122 °F

2. Quick Start

Congratulations on purchasing your Antelope Audio Edge Go bus-powered modeling microphone!

There are just a couple of steps to go through before you are ready to begin recording.

1. Download and install the Edge Go USB Driver and Antelope Audio Launcher for your operating

system.

2. Place the Edge Go into the shockmount or desktop stand and connect the microphone to your

computer using a standard USB C cable (one is provided in the box), or USB C to USB Type-A

(male) cable.

3. Start the Antelope Audio Launcher. Once it's running, update the device firmware and install the

PC/Mac Control Panel for Edge Go. It all happens inside the Launcher.

4. Head to the Software tab and install the EdgeDuo package to get the mic emulations and effects

(FPGA) for Edge Go. Yes, they are the same as in our coveted Edge Duo large-diaphragm

condenser modeling mic.

5. Should you wish to use the mic emulations and effects as native plug-ins in your DAW, download

and install the PACE iLok License Manager software. Plug in an iLok v2/v3 USB dongle (sold

separately) and use the activation codes from the leaflet to download and authorize the plug-ins.

Congratulations! You are now ready to turn Edge Go into the heart of your recording setup.

Thank you for choosing Antelope Audio.

Tip: Use Antelope Launcher for download and installation, iLok License Manager for

authorization.

Tip: Never used audio software (DAW) before? Plug in a pair of headphones into the 3.5mm jack

and explore the presets inside the Control Panel as you talk or play into the microphone. Hear the

difference made by the real-time mic emulations and effects. Experiment with stacking effects and

adjusting parameters to taste. As long as it sounds good, you are doing it right!

Experiencing any difficulties with the initial setup? Head to for a Live

Chat session with a Customer Support specialist, or reach out over phone and e-mail. Availability

times are as follows:

•Support By Phone

US time: 00: – 08: (CST), Monday – Friday

European time: 06: – 02: (GMT), Monday – Friday.

US Phone Number (916) 238-1643 / UK Phone Number +44 1925933423

•Live Chat

US time: 00: – 02: (CST), Monday – Friday

European time: 06: – 08: (GMT), Monday – Friday.

If you’re trying to reach us outside working hours, we advise you to file a ticket in our customer

support system or leave a voice message.

3. The Control Panel and You