2024年9月22日发(作者：果颖馨)
Quick Setup
IMPORTANT: Before using this product, make sure you read these instructions
and the safety instructions in the online User’s Guide.
Note: These illustrations show the Pro EX9240, but the instructions are the
same for the EX9230 unless otherwise noted.
USB device
Connect a supported digital camera, USB flash drive, or USB storage device to
the projector’s USB-A (flat) port.
USB cable
Contents
If you connect a digital camera, USB flash drive, or USB storage device, you can
Make sure your projector box includes all of these parts (wireless LAN module
cover not included with Pro EX9240):
Connect the projector
Choose from the following connections. See the sections below or the online
User’s Guide for details.
Computer
USB cable
HDMI cable
VGA cable
Audio cable
HDMI port
Connect one end of an HDMI cable to one of the projector’s HDMI ports and
the other end to an HDMI port on your computer.
Computer port
Connect one end of a VGA cable to the projector’s Computer port and the
other end to your laptop or computer’s monitor port. Make sure to switch
your laptop to external display (see “Troubleshooting” on the back of this
sheet). You can also connect an audio cable.
USB port
Connect the square end of a USB cable to the projector’s USB-B (square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows Vista
®
or later: After turning on the projector, follow the on-screen
instructions to install the Epson
®
USB Display software (EMP_; only
on first connection). If the software screen does not display automatically, open
My Computer, Computer, or This PC, then double-click EPSON_PJ_UD.
OS X 10.7.x or higher: After turning on the projector, the setup folder for
USB Display appears in the Finder. Double-click USB Display Installer and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection).
Video device
Connect multiple video devices and use the Source Search button on the
projector or remote control to switch between them.
HDMI cable
RCA audio cable
RCA video cable
(composite video)
use the projector’s PC Free feature. See the online User’s Guide for details.
Turn on your equipment
1
T urn on your computer or video source.
2
P lug in the projector. The power light on the projector turns blue.
3
O pen the A/V Mute slide all the way.
4
Press the power button on the projector or remote control. The
projector beeps, the Status light flashes blue, and then stays on.
Note: To shut down the projector, press the power button twice.
5
U
se the arrow buttons on the remote control to highlight any of the
options on the Home screen that appears, then press to select it.
You can switch between projection sources and quickly access various
adjustment options from this screen.
6
T
he default language of the menu system is English. To select another
language, press the Menu button on the projector or remote control.
Select Extended and press . Select Language and press . Select your
language and press . Press the Menu button to exit the menu system.
Adjust the image
1
If you don’t see an image, press the Source Search button on the
projector or remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3
T o reduce or enlarge the image, turn the zoom ring.
4
T o sharpen the image, turn the focus ring.
5
If your image looks like or , you may have placed the projector
off to one side of the screen at an angle. Place the projector directly in
front of the center of the screen, facing the screen squarely. If you can’t
move the projector, use the horizontal keystone slider on the projector to
correct the image shape.
6
Your projector automatically adjusts an image that looks like or ,
but if necessary you can press the or button on the projector to
correct it.
Using the remote control
Install the batteries as shown (two AA batteries).
Turn projector
Choose which source
on and off
to display
Access projector
menus
Navigate projector
menus
Turn off projector
display
Access the Home
screen
For more information on using the remote control, see the online User’s Guide.
Setting up a wireless
connection
Follow these steps to set up the projector for a wireless network connection.
To project wirelessly, you need to install the optional wireless LAN module for
the EX9230 (part number V12H005A02).
Note: You do not need the wireless LAN module for the Pro EX9240 because
the wireless functionality is built-in. Skip to “Select wireless network settings.”
Install the optional wireless LAN module (EX9230)
1
R emove the wireless LAN module cover screw.
2
I nsert the wireless LAN module into the USB-A port.
3
Attach the included wireless LAN module cover and secure it using the
screw you removed.
Note: The light on the wireless LAN module turns on when the module is
installed and operating. The light flashes when the module is communicating
over the network.
Select wireless network settings
1
Press the Menu button on the remote control.
2
Select the Network menu and press .
3
Select On as the Wireless LAN Power setting.
4
Select Network Configuration and press .
5
Select the Wireless LAN menu and press .
6
S elect one of the following as the Connection Mode setting:
•
Quick for a direct connection to a computer, tablet, or smartphone.
•
Advanced to connect your projector to a router or access point.
7
Select any other settings on the Wireless LAN menu as necessary. See the
online User’s Guide for details.
8
When you are finished, select Complete and follow the on-screen
instructions to save your settings and exit the menus.
Install the optional software
If you connected a computer to the projector, you can download and install
optional software to perform various tasks wirelessly, such as monitoring or
controlling your projector and projecting from multiple computers.
You can download the optional software and its manuals from the Epson
website, as described in “Where to get help.”
Using web remote
You can use a standard web browser to control the projector through the
network. A virtual remote control on your computer screen lets you perform
many of the same functions as you can with the physical remote control.
1
Open your web browser and enter the IP address of the projector you
want to monitor in the browser’s address box.
If you’re not sure what the IP address of the projector is, turn the
projector on and select Net. Info. - Wireless LAN from the Network
menu to display the IP address of the projector. (Do not enter the leading
zeroes.)
2
Enter EPSONWEB as the user name and admin as the password, then
click OK. The Epson Web Control menu opens.
3
Select Basic Control. If you see a login screen, enter EPSONREMOTE as
the user name and guest as the password.
4
Use the on-screen buttons to operate the projector, as you would using
the remote control. See the online User’s Guide for details.
Search for sources
Select image source
Turn off picture Adjust volume
and sound
Using the Epson iProjection
app
You can project wirelessly from a mobile device (iOS, Android™, or
Chromebook™) using the Epson iProjection™ app and a QR code.
1
Use the following QR code to download and install the Epson iProjection
app.
2
If you connected the projector to a network wirelessly, make sure to
connect your mobile device to the same network.
3
Press the LAN button on the remote control to display a QR code on the
projector screen.
4
S tart Epson iProjection on your mobile device.
5
U se the QR code reader feature to read the QR code displayed.
6
F ollow the app instructions to connect your device to the projector.
For more information on setting up and using this app, visit
/iprojection (U.S.) or /iprojection (Canada).
Mirroring a mobile device
If your mobile device (laptop, smartphone, or tablet) supports Miracast
®
, you
can project or mirror your device’s screen wirelessly (Pro EX9240). You do not
need any additional software to use this feature.
Note: Some restrictions apply. See the online User’s Guide for details.
Select screen mirroring settings
1
Press the Menu button on the remote control.
2
Select the Network menu and press .
3
Select On as the Screen Mirroring setting.
4
Select Screen Mirroring Settings and press . Press again.
5
Select any of the Screen Mirroring Settings options as necessary. See
the online User’s Guide for details.
6
When you finish selecting settings, select Set and follow the on-screen
instructions to save your settings and exit the menus.
Connect your device
1
Press the LAN button on the remote control. You see the Screen Mirroring
standby screen.
2
Use the Miracast function on your device to search for the projector. You
see a list of available devices.
Note: See your device’s documentation for details on using its Miracast
function.
3
If you see a PIN entry screen on your device, enter the PIN code displayed
on the Screen Mirroring standby screen or at the bottom right of the
projected image.
The projector displays the image from your device once a connection is
established.
Caution: It may take some time to establish a connection. Do not
disconnect the projector’s power cord while it is connecting to your
device. Doing so may cause your device to freeze or malfunction.
Troubleshooting
•
If you see a No signal message after turning on the projector, make sure
your computer or video device is properly connected.
•
I f you see a blank screen, check the following:
•
Make sure the A/V Mute slide is open.
•
Make sure the power light on the projector is blue and not
flashing.
•
Press the power button to wake the projector from standby or
sleep mode, if necessary.
•
If you see a blank screen when a computer is connected, check the
following:
•
On some Windows
®
laptops, you may need to hold down the Fn key
and press F7 or the function key that lets you display on an external
monitor. It may be labeled CRT/LCD or have an icon such as.
On Windows 7 or later, hold down the Windows key and press P at
the same time, then click Duplicate.
•
If you’re using a Mac laptop, open System Preferences and
select Displays. Click the Arrangement tab and select the Mirror
Displays checkbox.
•
If the projector does not respond to remote control commands, make sure
the batteries in the remote control are installed correctly. Replace the
batteries if necessary.
Registration
Register today to get product updates and exclusive offers. You can register
online at /webreg.
Where to get help
Manuals
For more information about using the projector, you can view or download the
online manuals from the Epson website, as described below.
Internet support
Visit /support (U.S.) or /support (Canada)
and search for your product to download software and utilities, view manuals,
get FAQs and troubleshooting advice, or contact Epson.
Telephone support services
To use the Epson PrivateLine
®
Support service, call (800) 637-7661. This service
is available for the duration of your warranty period. You may also speak with
a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).
Support hours are 6
AM
to 8
PM
, Pacific Time, Monday through Friday, and
7
AM
to 4
PM
, Pacific Time, Saturday. Days and hours of support are subject to
change without notice. Toll or long distance charges may apply.
Optional accessories
For a list of optional accessories, see the online User’s Guide.
You can purchase screens or other accessories from an Epson authorized
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766).
Or you can purchase online at (U.S. sales) or
(Canadian sales).
EPSON is a registered trademark, EPSON Exceed Your Vision is a registered logomark, and Epson iProjection is a
trademark of Seiko Epson Corporation.
PrivateLine is a registered trademark of Epson America, Inc.
Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.
Mac and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.
Android and Chromebook are trademarks of Google LLC.
General Notice: Other product names used herein are for identification purposes only and may be trademarks
of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2020 Epson America, Inc., 3/20
Printed in XXXXXX
CPD-58866
2024年9月22日发(作者：果颖馨)
Quick Setup
IMPORTANT: Before using this product, make sure you read these instructions
and the safety instructions in the online User’s Guide.
Note: These illustrations show the Pro EX9240, but the instructions are the
same for the EX9230 unless otherwise noted.
USB device
Connect a supported digital camera, USB flash drive, or USB storage device to
the projector’s USB-A (flat) port.
USB cable
Contents
If you connect a digital camera, USB flash drive, or USB storage device, you can
Make sure your projector box includes all of these parts (wireless LAN module
cover not included with Pro EX9240):
Connect the projector
Choose from the following connections. See the sections below or the online
User’s Guide for details.
Computer
USB cable
HDMI cable
VGA cable
Audio cable
HDMI port
Connect one end of an HDMI cable to one of the projector’s HDMI ports and
the other end to an HDMI port on your computer.
Computer port
Connect one end of a VGA cable to the projector’s Computer port and the
other end to your laptop or computer’s monitor port. Make sure to switch
your laptop to external display (see “Troubleshooting” on the back of this
sheet). You can also connect an audio cable.
USB port
Connect the square end of a USB cable to the projector’s USB-B (square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows Vista
®
or later: After turning on the projector, follow the on-screen
instructions to install the Epson
®
USB Display software (EMP_; only
on first connection). If the software screen does not display automatically, open
My Computer, Computer, or This PC, then double-click EPSON_PJ_UD.
OS X 10.7.x or higher: After turning on the projector, the setup folder for
USB Display appears in the Finder. Double-click USB Display Installer and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection).
Video device
Connect multiple video devices and use the Source Search button on the
projector or remote control to switch between them.
HDMI cable
RCA audio cable
RCA video cable
(composite video)
use the projector’s PC Free feature. See the online User’s Guide for details.
Turn on your equipment
1
T urn on your computer or video source.
2
P lug in the projector. The power light on the projector turns blue.
3
O pen the A/V Mute slide all the way.
4
Press the power button on the projector or remote control. The
projector beeps, the Status light flashes blue, and then stays on.
Note: To shut down the projector, press the power button twice.
5
U
se the arrow buttons on the remote control to highlight any of the
options on the Home screen that appears, then press to select it.
You can switch between projection sources and quickly access various
adjustment options from this screen.
6
T
he default language of the menu system is English. To select another
language, press the Menu button on the projector or remote control.
Select Extended and press . Select Language and press . Select your
language and press . Press the Menu button to exit the menu system.
Adjust the image
1
If you don’t see an image, press the Source Search button on the
projector or remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3
T o reduce or enlarge the image, turn the zoom ring.
4
T o sharpen the image, turn the focus ring.
5
If your image looks like or , you may have placed the projector
off to one side of the screen at an angle. Place the projector directly in
front of the center of the screen, facing the screen squarely. If you can’t
move the projector, use the horizontal keystone slider on the projector to
correct the image shape.
6
Your projector automatically adjusts an image that looks like or ,
but if necessary you can press the or button on the projector to
correct it.
Using the remote control
Install the batteries as shown (two AA batteries).
Turn projector
Choose which source
on and off
to display
Access projector
menus
Navigate projector
menus
Turn off projector
display
Access the Home
screen
For more information on using the remote control, see the online User’s Guide.
Setting up a wireless
connection
Follow these steps to set up the projector for a wireless network connection.
To project wirelessly, you need to install the optional wireless LAN module for
the EX9230 (part number V12H005A02).
Note: You do not need the wireless LAN module for the Pro EX9240 because
the wireless functionality is built-in. Skip to “Select wireless network settings.”
Install the optional wireless LAN module (EX9230)
1
R emove the wireless LAN module cover screw.
2
I nsert the wireless LAN module into the USB-A port.
3
Attach the included wireless LAN module cover and secure it using the
screw you removed.
Note: The light on the wireless LAN module turns on when the module is
installed and operating. The light flashes when the module is communicating
over the network.
Select wireless network settings
1
Press the Menu button on the remote control.
2
Select the Network menu and press .
3
Select On as the Wireless LAN Power setting.
4
Select Network Configuration and press .
5
Select the Wireless LAN menu and press .
6
S elect one of the following as the Connection Mode setting:
•
Quick for a direct connection to a computer, tablet, or smartphone.
•
Advanced to connect your projector to a router or access point.
7
Select any other settings on the Wireless LAN menu as necessary. See the
online User’s Guide for details.
8
When you are finished, select Complete and follow the on-screen
instructions to save your settings and exit the menus.
Install the optional software
If you connected a computer to the projector, you can download and install
optional software to perform various tasks wirelessly, such as monitoring or
controlling your projector and projecting from multiple computers.
You can download the optional software and its manuals from the Epson
website, as described in “Where to get help.”
Using web remote
You can use a standard web browser to control the projector through the
network. A virtual remote control on your computer screen lets you perform
many of the same functions as you can with the physical remote control.
1
Open your web browser and enter the IP address of the projector you
want to monitor in the browser’s address box.
If you’re not sure what the IP address of the projector is, turn the
projector on and select Net. Info. - Wireless LAN from the Network
menu to display the IP address of the projector. (Do not enter the leading
zeroes.)
2
Enter EPSONWEB as the user name and admin as the password, then
click OK. The Epson Web Control menu opens.
3
Select Basic Control. If you see a login screen, enter EPSONREMOTE as
the user name and guest as the password.
4
Use the on-screen buttons to operate the projector, as you would using
the remote control. See the online User’s Guide for details.
Search for sources
Select image source
Turn off picture Adjust volume
and sound
Using the Epson iProjection
app
You can project wirelessly from a mobile device (iOS, Android™, or
Chromebook™) using the Epson iProjection™ app and a QR code.
1
Use the following QR code to download and install the Epson iProjection
app.
2
If you connected the projector to a network wirelessly, make sure to
connect your mobile device to the same network.
3
Press the LAN button on the remote control to display a QR code on the
projector screen.
4
S tart Epson iProjection on your mobile device.
5
U se the QR code reader feature to read the QR code displayed.
6
F ollow the app instructions to connect your device to the projector.
For more information on setting up and using this app, visit
/iprojection (U.S.) or /iprojection (Canada).
Mirroring a mobile device
If your mobile device (laptop, smartphone, or tablet) supports Miracast
®
, you
can project or mirror your device’s screen wirelessly (Pro EX9240). You do not
need any additional software to use this feature.
Note: Some restrictions apply. See the online User’s Guide for details.
Select screen mirroring settings
1
Press the Menu button on the remote control.
2
Select the Network menu and press .
3
Select On as the Screen Mirroring setting.
4
Select Screen Mirroring Settings and press . Press again.
5
Select any of the Screen Mirroring Settings options as necessary. See
the online User’s Guide for details.
6
When you finish selecting settings, select Set and follow the on-screen
instructions to save your settings and exit the menus.
Connect your device
1
Press the LAN button on the remote control. You see the Screen Mirroring
standby screen.
2
Use the Miracast function on your device to search for the projector. You
see a list of available devices.
Note: See your device’s documentation for details on using its Miracast
function.
3
If you see a PIN entry screen on your device, enter the PIN code displayed
on the Screen Mirroring standby screen or at the bottom right of the
projected image.
The projector displays the image from your device once a connection is
established.
Caution: It may take some time to establish a connection. Do not
disconnect the projector’s power cord while it is connecting to your
device. Doing so may cause your device to freeze or malfunction.
Troubleshooting
•
If you see a No signal message after turning on the projector, make sure
your computer or video device is properly connected.
•
I f you see a blank screen, check the following:
•
Make sure the A/V Mute slide is open.
•
Make sure the power light on the projector is blue and not
flashing.
•
Press the power button to wake the projector from standby or
sleep mode, if necessary.
•
If you see a blank screen when a computer is connected, check the
following:
•
On some Windows
®
laptops, you may need to hold down the Fn key
and press F7 or the function key that lets you display on an external
monitor. It may be labeled CRT/LCD or have an icon such as.
On Windows 7 or later, hold down the Windows key and press P at
the same time, then click Duplicate.
•
If you’re using a Mac laptop, open System Preferences and
select Displays. Click the Arrangement tab and select the Mirror
Displays checkbox.
•
If the projector does not respond to remote control commands, make sure
the batteries in the remote control are installed correctly. Replace the
batteries if necessary.
Registration
Register today to get product updates and exclusive offers. You can register
online at /webreg.
Where to get help
Manuals
For more information about using the projector, you can view or download the
online manuals from the Epson website, as described below.
Internet support
Visit /support (U.S.) or /support (Canada)
and search for your product to download software and utilities, view manuals,
get FAQs and troubleshooting advice, or contact Epson.
Telephone support services
To use the Epson PrivateLine
®
Support service, call (800) 637-7661. This service
is available for the duration of your warranty period. You may also speak with
a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).
Support hours are 6
AM
to 8
PM
, Pacific Time, Monday through Friday, and
7
AM
to 4
PM
, Pacific Time, Saturday. Days and hours of support are subject to
change without notice. Toll or long distance charges may apply.
Optional accessories
For a list of optional accessories, see the online User’s Guide.
You can purchase screens or other accessories from an Epson authorized
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766).
Or you can purchase online at (U.S. sales) or
(Canadian sales).
EPSON is a registered trademark, EPSON Exceed Your Vision is a registered logomark, and Epson iProjection is a
trademark of Seiko Epson Corporation.
PrivateLine is a registered trademark of Epson America, Inc.
Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.
Mac and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.
Android and Chromebook are trademarks of Google LLC.
General Notice: Other product names used herein are for identification purposes only and may be trademarks
of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2020 Epson America, Inc., 3/20
Printed in XXXXXX
CPD-58866