2024年9月22日发(作者：曾怀蕾)
Planning and Preparation Guide
Rapid EqualLogic Configuration Series
Switch: Dell Networking N4000 Series or PowerConnect 8100 Series
Array: PS4110, 6110, or 6510
Host: VMware ESXi, Windows, FS7610 NAS, or Red Hat Enterprise Linux
February 2016
Revisions
Date
Nov. 2012
April 2013
December 2013
February 2014
May 2014
February 2016
Status
Initial release
Combined all PowerConnect 8132 and 8132F Introductions into one document
Added FS7610 NAS and PS6210
Added N4000
Added RHEL configuration information
Table corrections
THIS WHITE PAPER IS FOR INFORMATIONAL PURPOSES ONLY, AND MAY CONTAIN TYPOGRAPHICAL ERRORS AND
TECHNICAL INACCURACIES. THE CONTENT IS PROVIDED AS IS, WITHOUT EXPRESS OR IMPLIED WARRANTIES OF
ANY KIND.
Copyright © 2012 - 2016 Dell Inc. All rights reserved. Dell and the Dell logo are trademarks of Dell Inc. in the United
States and/or other jurisdictions. All other marks and names mentioned herein may be trademarks of their respective
companies.
claiming the marks and names or their products. Dell disclaims any proprietary interest in the marks and names of
others.
2 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
1 Introduction
This document is one part of a complete installation guide series from the Rapid EqualLogic
Configuration Portal. Please make sure that you have the complete set for your configuration before
proceeding.
Full link to document site:
/techcenter/storage/w/wiki/-equallogic-configuration-portal-
1.1 Document use
Keyboard keys are shown in brackets with the actual key bolded.
Example: [Enter]
Commands that are to be typed are bolded and shown after the appropriate prompt.
Example:
console>enable
1.2 Intended audience
This implementation guide for new systems is intended for System or Storage Administrators with
experience deploying Windows
®
, VMware
®
vSphere
®
ESXi™, or Red Hat Enterprise Linux
®
servers, storage
systems, and Ethernet networking. If you are unsure about completing the installation, Dell support is
available and ready to assist you.
1.3 List of references
TR1050 – Monitoring Your PS Series SAN with SAN HeadQuarters
/WorkArea/?id=8749
Note: A login is required to access the EqualLogic support site. If you do not have a login, go to
/ and register.
SAN HQ User Guide,
available for download at: /
Dell EqualLogic Compatibility Matrix
, available for download at:
/techcenter/storage/w/wiki/ogic-compatibility-matrix-
Dell EqualLogic Configuration Guide
, available for download at:
/dell-groups/dtcmedia/m/mediagallery/19852516/
3 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
2
2.1
Prerequisites
Serial cable
A null-modem DB9 serial cable (included with the array)
A switch serial console management cable (included with the switch)
2.2 Software
Note: A login is required to access the EqualLogic support site. If you do not have a login, go to
/ and register.
2.2.1 VMware host operating system
Latest EqualLogic Multipathing Extension Module for VMware
®
vSphere installation package
(/).
Latest SAN HeadQuarters installation package (/).
The VMware vSphere® Command-Line Interface (vCLI) environment must be installed on the
management server (/downloads).
Latest network device driver update (/downloads).
Before proceeding, you may need to download a driver update package for your network adapter. Refer
to the contained in the update file for instructions on updating from the ESXi command line
or using VMware Update Manager (VUM).
2.2.2 Windows host operating system
Latest network adapter device driver update ()
Latest Host Integration Tools (HIT) kit installation package (/)
Latest SAN HeadQuarters installation package (/)
2.2.3 Red Hat Enterprise Linux operating system
Latest network adapter device driver update ()
Latest Host Integration Tools (HIT) kit installation package (/)
2.2.4 FS7610 – Fluid File System
Fluid File System (or FluidFS) version 3, or later (/)
Refer to the
Dell EqualLogic FS7610 Installation and Setup Guide
(on /)
for information on installing and configuring the FS7610 NAS appliance.
4 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
2.3
2.3.1
Configuration settings
VMware host operating system
This document assumes that you have already installed VMware ESXi and have applied the latest critical
patches available through VMware Update Manager.
To properly configure your vSphere ESXi system, you must also have a management system available. This
system must be running Windows (2008, Windows 7, etc.)
2.3.2 Windows host operating system
This document assumes that you have already installed Windows 2008 R2 with Service Pack 1 or later and
have applied the latest critical security updates available through Windows Update.
2.3.3 Red Hat Enterprise Linux operating system
This document assumes that you have already installed RHEL 6.5 or later and have applied the latest
critical security updates available through Linux.
2.3.4 FS7610 NAS with Fluid File System
If you have a FS7610 appliance, you must be running FluidFS version 3 or later. This document assumes
that all BIOS and firmware are up to data as required and that the FS7610 appliance is not configured (or
has been re-initialized if previously configured).
Refer to Chapter 7 of the
Dell EqualLogic Group Manager Administrator’s Manual
for complete details on
configuring the FS7610 NAS appliance. It can be downloaded from /
2.3.5 Switch
Reference the
EqualLogic Compatibility Matrix
at /dell-
groups/dtcmedia/m/mediagallery/19856862/ to determine the recommended switch
firmware version. To get the latest update, visit . Installation instructions are
provided as part of the download. The switch user manual can also be downloaded for reference.
2.3.6 Array
Reference the
EqualLogic Compatibility Matrix
at /dell-
groups/dtcmedia/m/mediagallery/19856862/ to determine the recommended array
firmware version. To get the latest update, visit /. Update instructions and
release notes are available with the latest downloads.
5 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
2.4 Configuration information
Your iSCSI SAN configuration requires several static IP addresses. Complete this form and have it available
for reference during the configuration.
Table 1 IP addresses needed for SAN configuration
Host #1 or
FS7610 NAS
controller #1
Array #1
Additional host
or FS7610 NAS
controller
Additional array
… Host iSCSI Initiator
Port 1
Port 2
Array Target
Port 1 (eth0)
Port 2 (eth1)
(PS6510/PS6210 only)
Management (Out-of-
Band/eth1 or eth2)
…
Array Group Management
IP (Out-of-Band)
Array Group Management
IP (In-Band)
Out-of-Band Switch
Management Port
FS7610 NAS Cluster IP
FS7610 NAS Cluster
Management IP
Internal Network initial IP
address
Switch admin password: _________________________
Array Group admin password: __________________________*
Array Group membership password: __________________________*
*These may be the same password – see the Dell EqualLogic Group Manager online help for more
information.
Hint: use “Autofill” to complete the IP
addresses for the NAS controllers.
Hint: use “Autofill” to complete the IP
addresses for the NAS controllers.
Hint: A private subnet such as
172.16.1.0 can be used
6 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
3 Connectivity Diagrams
Use the appropriate diagram and following point-to-point table when cabling the SAN.
Note: Add servers and arrays to the configurations as needed using the same connection patterns.
Figure 1 Dell NetworkingN4000 or PowerConnect 8100 series and EqualLogic PS4110 or PS6110 (tables
on page 13)
7 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
Figure 2 Dell Networking N4000 or PowerConnect 8100 series with EqualLogic PS7610 and PS4110 or
PS6110 (tables on page 13)
8 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
Figure 3 Dell Networking N4000 series or 8100 series and EqualLogic PS6210 (tables on page 14)
9 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
Figure 4 Dell Networking N4000 or PowerConnect 8100 series with EqualLogic PS7610 and PS6210
(tables on page 15)
10 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
Figure 5 Dell NetworkingN4000 or PowerConnect 8100 series and EqualLogic PS6510 (tables on page
15)
Note: The PowerConnect 8132 and 8164 switches only provide 10GBASE-T ports and are not compatible
with this configuration. The above configuration(s) require 10Gb SFP+ ports, only available with the
PowerConnect 8132F and 8164F switches.
11 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
Figure 6 Dell Networking N4000 or PowerConnect 8100 series with EqualLogic PS7610 and PS6510
(tables on page 16)
Note: The PowerConnect 8132 and 8164 switches only provide 10GBASE-T ports and are not compatible
with this configuration. The above configuration(s) require 10Gb SFP+ ports, only available with the
PowerConnect 8132F and 8164F switches.
12 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
3.1 Point to point connection tables
Table 2
Array 1
Table 3
Array 1
Table 4
FS7610
NAS
Array 1
Dell Networking 8132 or 8132F with EqualLogic FS7610 NAS and PS4110 or PS6110
Switch 1 Port
1
2
24
To
Controller 1, port 1
Controller 2, port 1
Controller 0, port 0
Switch 2 Port
1
2
24
To
Controller 1, port 3
Controller 2, port 3
Controller 1, port 0
Dell Networking N4000 series or PowerConnect 8164(F) and EqualLogic PS4110 or PS6110
Switch 1 Port
1
48
To
Server 1, port 1
Controller 0, port 0
Switch 2 Port
1
48
To
Server 1, port 2
Controller 1, port 0
Dell Networking N4000 series or PowerConnect 8132(F) with EqualLogic PS4110 or PS6110
Switch 1 Port
1
24
To
Server 1, port 1
Controller 0, port 0
Switch 2 Port
1
24
To
Server 1, port 2
Controller 1, port 0
13 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
Table 5
FS7610
NAS
Array 1
Table 6
Array 1
23
24
Table 7
Array 1
47
48
Dell Networking N4000 series or PowerConnect 8164(F) with EqualLogic PS6210
Switch 1 Port
1
To
Server 1, port 1
Controller 0, port 0
Controller 1, port 1
47
48
Switch 2 Port
1
To
Server 1, port 2
Controller 0, port 1
Controller 1, port 0
Dell Networking N4000 series or PowerConnect 8132(F) with EqualLogic PS6210
Switch 1 Port
1
To
Server 1, port 1
Controller 0, port 0
Controller 1, port 1
23
24
Switch 2 Port
1
To
Server 1, port 2
Controller 0, port 1
Controller 1, port 0
Dell Networking 8164 or 8164F with EqualLogic FS7610 NAS and the PS4110 or PS6110
Switch 1 Port
1
2
48
To
Controller 1, port 1
Controller 2, port 1
Controller 0, port 0
Switch 2 Port
1
2
48
To
Controller 1, port 2
Controller 2, port 2
Controller 1, port 0
14 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
Table 8 Dell Networking N4000 series or PowerConnect 8132(F) with EqualLogic 7610 NAS and
PS6210
FS7610
NAS
Array 1
Switch 1 Port
1
2
23
24
Table 9 Dell Networking N4000 series or PowerConnect 8164(F) with EqualLogic FS7610 NAS and the
PS6210
FS7610
NAS
Array 1
Switch 1 Port
1
2
47
48
Table 10
Array 1
23
24
Dell Networking N4000 series or PowerConnect 8132F with the EqualLogic PS6510
Switch 1 Port
1
To
Server 1, port 1
Controller 0, port 0
Controller 1, port 1
23
24
Switch 2 Port
1
To
Server 1, port 2
Controller 0, port 1
Controller 1, port 0
To
Controller 1, port 1
Controller 2, port 1
Controller 0, port 0
Controller 1, port 1
Switch 2 Port
1
2
47
48
To
Controller 1, port 3
Controller 2, port 3
Controller 0, port 1
Controller 1, port 0
To
Controller 1, port 1
Controller 2, port 1
Controller 0, port 0
Controller 1, port 1
Switch 2 Port
1
2
23
24
To
Controller 1, port 3
Controller 2, port 3
Controller 0, port 1
Controller 1, port 0
15 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
Table 11
Array 1
47
48
Dell Networking N4000 series or PowerConnect 8164F with EqualLogic PS6510
Switch 1 Port
1
To
Server 1, port 1
Controller 0, port 0
Controller 1, port 1
47
48
Switch 2 Port
1
To
Server 1, port 2
Controller 0, port 1
Controller 1, port 0
Note: There is no figure associated with Table 11’s configuration. The above table references a
PowerConnect 8164F that has 48 physical SFP+ ports which is not detailed in any of the figures within
Section 3.
Table 12 Dell Networking N4000 series or PowerConnect 8132F with EqualLogic FS7610 NAS and
PS6510
FS7610
NAS
Array 1
Table 13 Dell Networking N4000 series or PowerConnect 8164F with EqualLogic FS7610 NAS and the
PS6510
FS7610
NAS
Array 1
Switch 1 Port
1
2
47
48
To
Controller 1, port 1
Controller 2, port 1
Controller 1, port 1
Controller 0, port 0
Switch 2 Port
1
2
47
48
To
Controller 1, port 2
Controller 2, port 2
Controller 0, port 1
Controller 1, port 0
Switch 1 Port
1
2
24
To
Controller 1, port 1
Controller 2, port 1
Controller 0, port 0
Switch 2 Port
1
2
24
To
Controller 1, port 2
Controller 2, port 2
Controller 1, port 0
Note: There is no figure associated with Table 13’s configuration. The above table references a
PowerConnect 8164F that has 48 physical SFP+ ports which is not detailed in any of the figures within
Section 3.
16 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
17 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
2024年9月22日发(作者：曾怀蕾)
Planning and Preparation Guide
Rapid EqualLogic Configuration Series
Switch: Dell Networking N4000 Series or PowerConnect 8100 Series
Array: PS4110, 6110, or 6510
Host: VMware ESXi, Windows, FS7610 NAS, or Red Hat Enterprise Linux
February 2016
Revisions
Date
Nov. 2012
April 2013
December 2013
February 2014
May 2014
February 2016
Status
Initial release
Combined all PowerConnect 8132 and 8132F Introductions into one document
Added FS7610 NAS and PS6210
Added N4000
Added RHEL configuration information
Table corrections
THIS WHITE PAPER IS FOR INFORMATIONAL PURPOSES ONLY, AND MAY CONTAIN TYPOGRAPHICAL ERRORS AND
TECHNICAL INACCURACIES. THE CONTENT IS PROVIDED AS IS, WITHOUT EXPRESS OR IMPLIED WARRANTIES OF
ANY KIND.
Copyright © 2012 - 2016 Dell Inc. All rights reserved. Dell and the Dell logo are trademarks of Dell Inc. in the United
States and/or other jurisdictions. All other marks and names mentioned herein may be trademarks of their respective
companies.
claiming the marks and names or their products. Dell disclaims any proprietary interest in the marks and names of
others.
2 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
1 Introduction
This document is one part of a complete installation guide series from the Rapid EqualLogic
Configuration Portal. Please make sure that you have the complete set for your configuration before
proceeding.
Full link to document site:
/techcenter/storage/w/wiki/-equallogic-configuration-portal-
1.1 Document use
Keyboard keys are shown in brackets with the actual key bolded.
Example: [Enter]
Commands that are to be typed are bolded and shown after the appropriate prompt.
Example:
console>enable
1.2 Intended audience
This implementation guide for new systems is intended for System or Storage Administrators with
experience deploying Windows
®
, VMware
®
vSphere
®
ESXi™, or Red Hat Enterprise Linux
®
servers, storage
systems, and Ethernet networking. If you are unsure about completing the installation, Dell support is
available and ready to assist you.
1.3 List of references
TR1050 – Monitoring Your PS Series SAN with SAN HeadQuarters
/WorkArea/?id=8749
Note: A login is required to access the EqualLogic support site. If you do not have a login, go to
/ and register.
SAN HQ User Guide,
available for download at: /
Dell EqualLogic Compatibility Matrix
, available for download at:
/techcenter/storage/w/wiki/ogic-compatibility-matrix-
Dell EqualLogic Configuration Guide
, available for download at:
/dell-groups/dtcmedia/m/mediagallery/19852516/
3 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
2
2.1
Prerequisites
Serial cable
A null-modem DB9 serial cable (included with the array)
A switch serial console management cable (included with the switch)
2.2 Software
Note: A login is required to access the EqualLogic support site. If you do not have a login, go to
/ and register.
2.2.1 VMware host operating system
Latest EqualLogic Multipathing Extension Module for VMware
®
vSphere installation package
(/).
Latest SAN HeadQuarters installation package (/).
The VMware vSphere® Command-Line Interface (vCLI) environment must be installed on the
management server (/downloads).
Latest network device driver update (/downloads).
Before proceeding, you may need to download a driver update package for your network adapter. Refer
to the contained in the update file for instructions on updating from the ESXi command line
or using VMware Update Manager (VUM).
2.2.2 Windows host operating system
Latest network adapter device driver update ()
Latest Host Integration Tools (HIT) kit installation package (/)
Latest SAN HeadQuarters installation package (/)
2.2.3 Red Hat Enterprise Linux operating system
Latest network adapter device driver update ()
Latest Host Integration Tools (HIT) kit installation package (/)
2.2.4 FS7610 – Fluid File System
Fluid File System (or FluidFS) version 3, or later (/)
Refer to the
Dell EqualLogic FS7610 Installation and Setup Guide
(on /)
for information on installing and configuring the FS7610 NAS appliance.
4 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
2.3
2.3.1
Configuration settings
VMware host operating system
This document assumes that you have already installed VMware ESXi and have applied the latest critical
patches available through VMware Update Manager.
To properly configure your vSphere ESXi system, you must also have a management system available. This
system must be running Windows (2008, Windows 7, etc.)
2.3.2 Windows host operating system
This document assumes that you have already installed Windows 2008 R2 with Service Pack 1 or later and
have applied the latest critical security updates available through Windows Update.
2.3.3 Red Hat Enterprise Linux operating system
This document assumes that you have already installed RHEL 6.5 or later and have applied the latest
critical security updates available through Linux.
2.3.4 FS7610 NAS with Fluid File System
If you have a FS7610 appliance, you must be running FluidFS version 3 or later. This document assumes
that all BIOS and firmware are up to data as required and that the FS7610 appliance is not configured (or
has been re-initialized if previously configured).
Refer to Chapter 7 of the
Dell EqualLogic Group Manager Administrator’s Manual
for complete details on
configuring the FS7610 NAS appliance. It can be downloaded from /
2.3.5 Switch
Reference the
EqualLogic Compatibility Matrix
at /dell-
groups/dtcmedia/m/mediagallery/19856862/ to determine the recommended switch
firmware version. To get the latest update, visit . Installation instructions are
provided as part of the download. The switch user manual can also be downloaded for reference.
2.3.6 Array
Reference the
EqualLogic Compatibility Matrix
at /dell-
groups/dtcmedia/m/mediagallery/19856862/ to determine the recommended array
firmware version. To get the latest update, visit /. Update instructions and
release notes are available with the latest downloads.
5 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
2.4 Configuration information
Your iSCSI SAN configuration requires several static IP addresses. Complete this form and have it available
for reference during the configuration.
Table 1 IP addresses needed for SAN configuration
Host #1 or
FS7610 NAS
controller #1
Array #1
Additional host
or FS7610 NAS
controller
Additional array
… Host iSCSI Initiator
Port 1
Port 2
Array Target
Port 1 (eth0)
Port 2 (eth1)
(PS6510/PS6210 only)
Management (Out-of-
Band/eth1 or eth2)
…
Array Group Management
IP (Out-of-Band)
Array Group Management
IP (In-Band)
Out-of-Band Switch
Management Port
FS7610 NAS Cluster IP
FS7610 NAS Cluster
Management IP
Internal Network initial IP
address
Switch admin password: _________________________
Array Group admin password: __________________________*
Array Group membership password: __________________________*
*These may be the same password – see the Dell EqualLogic Group Manager online help for more
information.
Hint: use “Autofill” to complete the IP
addresses for the NAS controllers.
Hint: use “Autofill” to complete the IP
addresses for the NAS controllers.
Hint: A private subnet such as
172.16.1.0 can be used
6 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
3 Connectivity Diagrams
Use the appropriate diagram and following point-to-point table when cabling the SAN.
Note: Add servers and arrays to the configurations as needed using the same connection patterns.
Figure 1 Dell NetworkingN4000 or PowerConnect 8100 series and EqualLogic PS4110 or PS6110 (tables
on page 13)
7 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
Figure 2 Dell Networking N4000 or PowerConnect 8100 series with EqualLogic PS7610 and PS4110 or
PS6110 (tables on page 13)
8 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
Figure 3 Dell Networking N4000 series or 8100 series and EqualLogic PS6210 (tables on page 14)
9 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
Figure 4 Dell Networking N4000 or PowerConnect 8100 series with EqualLogic PS7610 and PS6210
(tables on page 15)
10 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
Figure 5 Dell NetworkingN4000 or PowerConnect 8100 series and EqualLogic PS6510 (tables on page
15)
Note: The PowerConnect 8132 and 8164 switches only provide 10GBASE-T ports and are not compatible
with this configuration. The above configuration(s) require 10Gb SFP+ ports, only available with the
PowerConnect 8132F and 8164F switches.
11 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
Figure 6 Dell Networking N4000 or PowerConnect 8100 series with EqualLogic PS7610 and PS6510
(tables on page 16)
Note: The PowerConnect 8132 and 8164 switches only provide 10GBASE-T ports and are not compatible
with this configuration. The above configuration(s) require 10Gb SFP+ ports, only available with the
PowerConnect 8132F and 8164F switches.
12 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
3.1 Point to point connection tables
Table 2
Array 1
Table 3
Array 1
Table 4
FS7610
NAS
Array 1
Dell Networking 8132 or 8132F with EqualLogic FS7610 NAS and PS4110 or PS6110
Switch 1 Port
1
2
24
To
Controller 1, port 1
Controller 2, port 1
Controller 0, port 0
Switch 2 Port
1
2
24
To
Controller 1, port 3
Controller 2, port 3
Controller 1, port 0
Dell Networking N4000 series or PowerConnect 8164(F) and EqualLogic PS4110 or PS6110
Switch 1 Port
1
48
To
Server 1, port 1
Controller 0, port 0
Switch 2 Port
1
48
To
Server 1, port 2
Controller 1, port 0
Dell Networking N4000 series or PowerConnect 8132(F) with EqualLogic PS4110 or PS6110
Switch 1 Port
1
24
To
Server 1, port 1
Controller 0, port 0
Switch 2 Port
1
24
To
Server 1, port 2
Controller 1, port 0
13 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
Table 5
FS7610
NAS
Array 1
Table 6
Array 1
23
24
Table 7
Array 1
47
48
Dell Networking N4000 series or PowerConnect 8164(F) with EqualLogic PS6210
Switch 1 Port
1
To
Server 1, port 1
Controller 0, port 0
Controller 1, port 1
47
48
Switch 2 Port
1
To
Server 1, port 2
Controller 0, port 1
Controller 1, port 0
Dell Networking N4000 series or PowerConnect 8132(F) with EqualLogic PS6210
Switch 1 Port
1
To
Server 1, port 1
Controller 0, port 0
Controller 1, port 1
23
24
Switch 2 Port
1
To
Server 1, port 2
Controller 0, port 1
Controller 1, port 0
Dell Networking 8164 or 8164F with EqualLogic FS7610 NAS and the PS4110 or PS6110
Switch 1 Port
1
2
48
To
Controller 1, port 1
Controller 2, port 1
Controller 0, port 0
Switch 2 Port
1
2
48
To
Controller 1, port 2
Controller 2, port 2
Controller 1, port 0
14 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
Table 8 Dell Networking N4000 series or PowerConnect 8132(F) with EqualLogic 7610 NAS and
PS6210
FS7610
NAS
Array 1
Switch 1 Port
1
2
23
24
Table 9 Dell Networking N4000 series or PowerConnect 8164(F) with EqualLogic FS7610 NAS and the
PS6210
FS7610
NAS
Array 1
Switch 1 Port
1
2
47
48
Table 10
Array 1
23
24
Dell Networking N4000 series or PowerConnect 8132F with the EqualLogic PS6510
Switch 1 Port
1
To
Server 1, port 1
Controller 0, port 0
Controller 1, port 1
23
24
Switch 2 Port
1
To
Server 1, port 2
Controller 0, port 1
Controller 1, port 0
To
Controller 1, port 1
Controller 2, port 1
Controller 0, port 0
Controller 1, port 1
Switch 2 Port
1
2
47
48
To
Controller 1, port 3
Controller 2, port 3
Controller 0, port 1
Controller 1, port 0
To
Controller 1, port 1
Controller 2, port 1
Controller 0, port 0
Controller 1, port 1
Switch 2 Port
1
2
23
24
To
Controller 1, port 3
Controller 2, port 3
Controller 0, port 1
Controller 1, port 0
15 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
Table 11
Array 1
47
48
Dell Networking N4000 series or PowerConnect 8164F with EqualLogic PS6510
Switch 1 Port
1
To
Server 1, port 1
Controller 0, port 0
Controller 1, port 1
47
48
Switch 2 Port
1
To
Server 1, port 2
Controller 0, port 1
Controller 1, port 0
Note: There is no figure associated with Table 11’s configuration. The above table references a
PowerConnect 8164F that has 48 physical SFP+ ports which is not detailed in any of the figures within
Section 3.
Table 12 Dell Networking N4000 series or PowerConnect 8132F with EqualLogic FS7610 NAS and
PS6510
FS7610
NAS
Array 1
Table 13 Dell Networking N4000 series or PowerConnect 8164F with EqualLogic FS7610 NAS and the
PS6510
FS7610
NAS
Array 1
Switch 1 Port
1
2
47
48
To
Controller 1, port 1
Controller 2, port 1
Controller 1, port 1
Controller 0, port 0
Switch 2 Port
1
2
47
48
To
Controller 1, port 2
Controller 2, port 2
Controller 0, port 1
Controller 1, port 0
Switch 1 Port
1
2
24
To
Controller 1, port 1
Controller 2, port 1
Controller 0, port 0
Switch 2 Port
1
2
24
To
Controller 1, port 2
Controller 2, port 2
Controller 1, port 0
Note: There is no figure associated with Table 13’s configuration. The above table references a
PowerConnect 8164F that has 48 physical SFP+ ports which is not detailed in any of the figures within
Section 3.
16 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series
17 Dell Networking N4000 Series and PowerConnect 8100 Series | Planning and Preparation Guide | Rapid EqualLogic
Configuration Series